1000 VeriSmart Fence U Clips - 23.7 cents each & FREE Freight! (20% Extra Discount) - 10 Bags of 100, Packed in 1 Box. (Minimum Buy = 3 Boxes).

20% Extra Discount for minimum 3 box buy. (Compared to 1 x box price). Price includes FREE postage (Australia Only).  

The ORIGINAL PREMIUM AUSTRALIAN DESIGNED & MADE VeriSmart Fence Clip - Made from Quality Galvabond Steel.   
(NOT Zink Plated - which will rust and will not last & NOT Aluminium - which is not strong and will cause galvanised wires to corrode!)

BIG DELIVERY NOTE: THIS PRODUCT CANNOT BE COLLECTED - IT IS STOCKED AT A 3rd PARTY LOGISTICS WAREHOUSE IN BRISBANE & IS SENT NATION-WIDE BY COURIER ONLY - It will normally take anywhere from 3 to 10 days for you to receive your order... so PLEASE GET YOUR ORDER IN EARLY and please understand that we cannot control the delivery time-frame.

The ‘VeriSmart Fence Clip’ (VSFC) is made from Quality Galvabond Steel in Australia!

Universal Smart 'U' Clip for attaching weld mesh fence panels, handy mesh sheets and horizontal line wires (Straining wires) on chain wire and acreage fencing. Packed in bags of 100, our U clips are easy to retail (Most retailers sell in bags of 100) and it's also easy for tradesmen to quickly grab enough U clips to cover a job at hand. No more counting out U clips!

Attention all fencing contractors and Handymen:

These clips are great to use, have a very neat finish and can be used in many applications!

Weldmesh fence panels up to 5mm: Got 20 x mesh fence panels to install? Just race along and fit your VeriSmart U clips to the weld mesh fence panels. A quick press with finger pressure and your clips will hold in place, ready to screw off! Our clips are fast and enjoyable to use. Pre-packed in bags of 100 so you can easily grab enough screws to cover you job.

Neat Fitment of Handy Mesh sheets: Need to fill in a gap under a house or commercial site? VeriSmart Fence U Clips are the Neatest and Easiest clips to use with Handy-Mesh Panels. (Smallest size mesh that our clips fit is 25x25mm).

Chain Wire Security Fencing: Stop attaching your horizontal line wires and barb wires with tie wire! Anyone who tries attaching their straining wires on Chain Wire Security Fencing with our VeriSmart U Clips (attached with metal tek screws) never goes back! It's simply too fast and too easy!

You will love the features and benefits of the ‘VeriSmart Fence Clip’! (VSFC)

• A Universal Fence Clip!
  The VSFC is designed to neatly attach handy mesh sheets and weldmesh fence panels (up to a 5mm in wire diameter) and also to be used to neatly attach horizontal straining wires, for chain wire security fences and acreage fences.

• A Very Neat Fitting ‘U’ Clip!
  The diameter of the bend of the VSFC clip is 5.5mm – it is designed to neatly fit wires up to 5mm in diameter and will not be loose. The hole in the clip is 6mm and is designed for fixing with a Tek screw.  These small tolerances achieve a very neat fitting fence clip.
  

• ‘Wide Open Mouth’ Design Makes it EASY to Fit!
  The ‘wide open mouth’ design of the VSFC makes it easy to fit the clip onto horizontal straining wires or onto a standard weldmesh fence panel.

• Easy to Close Because of Unique ‘Lever Action Design’!
  The VSFC clip design creates a unique ‘lever action effect’, which allows the clip to be easily closed by finger pressure, (to an initial closed position). This initial closed position allows the clip to “hold in place” until it is permanently fixed into place with a Tek screw.

• Pre-Shaped for The Best Possible Look and Finish!
  The VSFC clip is pre-bent at the right spot to achieve the best possible looking finish once it has been screwed into place. The clip is pre shaped and is NOT forced into shape by the Tek screw. The clip is designed so that both legs come together in the closed position, flat and parallel.

• Pre-Bent Shape makes it Kind to Powder Coated Finishes!
  If you require powder coated clips, the pre bent leg of the VSFC design means there is less chance of the powder coating cracking or flaking off. A basic ‘U’ clip is forced into shape as the Tek screw is driven in, putting pressure on the painted surface and often causing the powder coat to flake.